How to Manually Open or Close a Garage Door

Knowing how to manually open or close a garage door is important knowledge for every property owner, as garage doors are one of the most essential parts of a home. They not only provide convenience but also ensure a high level of security.

When doing things like leaving work or arriving home at the end of the day, the luxury of having an automatic garage door opening is something that can save a lot of effort and time, but have you considered what might happen if you were to experience a power outage at a critical moment? In situations like this, understanding how to manually open or close a garage door is invaluable.

Though the handling of a large garage door manually might seem like a daunting task, the facts are that most modern doors are designed to incorporate manual override features that make it a lot easier for an individual.

To make sure that you are equipped with the knowledge and expertise that you need to complete the task, here is a step-by-step instruction guide for how to manually operate a standard garage door, whether you happen to be on the inside or the outside. Keep reading for information on all of the tools and tips that you need!

There are plenty of manual garage door reasons for failure when it comes to automatic operation, so it is important to know what you are dealing with on this front. Some of the most common reasons include:

A power outage in your home or wider neighbourhood is arguably the most common reason why you might need to manually open or close a garage door. Automatic doors rely on electricity to work, so if there is no power on your property, the doors won’t be able to function as they are intended. This is, of course, very frustrating if you need to leave quickly or you can’t get in upon arriving home.

Even if you do have power, there can still be mechanical issues that stop an automatic door from opening. This can include everything from motor failure to electrical writing issues to broken sensors and more. If you find that the opener stops responding to your remote commands, then the only option left will be a manual override.

In these cases, it is best to call a professional for assistance due to the dangers of operating the door with broken equipment. The door will be very heavy without the assistance of the springs or cables and can result in injury if not addressed properly. In these cases, you will still be able to open the garage door by force, but be aware that it will be a much heavier task than usual. Be careful, forcing a broken door can sometimes cause even more damage.

Sometimes, in the event of certain emergency situations like natural disasters or fire, an automatic garage door might shut down and need to be manually operated instead. In situations like this where speed is critical, knowing exactly how to do what you are trying to do can potentially be a lifesaver.

Before you even think about attempting to complete such a task by hand, you need to know what are the best tools for garage door manual operation. With this in mind, here is a brief list of some of the essential garage door tools that will help to make the process safer and easier.

If there is a power outage, then your garage is likely to be poorly lit. A flashlight is essential in these circumstances because it helps you to stay safe and see what you are doing. Make sure to have a good one with a set of fully charged batteries on hand.

These are the essential tools that you need for loosening and tightening the bolts and fasteners that might hold the door’s emergency release mechanism in place. In certain cases, your garage door trolley is going to need further manual adjustment.

An additional option is a pair of locking pliers, which can be used to secure your garage door in place once it has been opened or closed according to your manual wishes. This can be very useful if the spring or cable components have been damaged and that door cannot stay up on its own.

If your door is proving difficult to move by hand, then you will need to apply an amount of lubricant to the tracks and rollers to encourage it to move more smoothly. Make sure to only use a lubricant that is specifically intended for garage door use, otherwise you risk damaging key components.

Depending on where on the garage door track the problem has occurred, you might need to use a step ladder to reach the spots you need to fix. Make sure that this is a sturdy, well-maintained step ladder because your health and safety should always be the number one priority.

The good news on this front is that the majority of modern garage doors can be fitted with external emergency release mechanisms, which allow you to disengage the door from outside and lift it manually. Here is how to go about external garage door manual opening.

Garage doors that have automatic openers come equipped with an emergency kit that you will probably find located towards the top of the door. This kit will usually contain a small keyhole or lock that houses the release cable. The keyhole in question will usually be found in the center of the door, right below the top panel.

Take the key that came with the garage door system and insert it into the lock, turning to release the cable. Once you find that the cable is accessible, you need to pull it to disengage the garage door from the automatic opener system.

Once the emergency release kit has been unlocked, pull on the cable that you find. This will trigger an action that disconnects the door from the automatic opener and allows it to be freely moved along the door tracks.

Once the door is disengaged from the opener, you will be able to manually lift it. Make sure to stand in the center of the door and use both of your hands to pull it upwards from the floor. Don’t be alarmed if you feel some resistance, the door will probably be heavy, even more so if the springs in the system are not working as they should be.

Once the door is fully opened as you intended, you need to ensure that it stays in place. If it fails to stay up on its own, take the locking pliers mentioned above and secure the door by clamping the pliers onto a sensible part of the door track. Doing this will prevent any accidents occurring from the door closing while you are inside the garage.

As you might imagine manually closing a garage door from the outside requires a similar set of steps to be followed. Here is a step-by-step runthrough of how to manually close a garage door from outside in the best, safest way possible.

If the door’s automatic opener is still engaged, you need to disconnect it using the emergency release cable. This step is necessary, even if you have previously opened the garage door manually. You can never be certain that the opener hasn’t re-engaged.

Once you are certain that the opener is disengaged, you can start to gently pull down on the door. Again, stand at the center of the door space and use both of your hands to guide the door down as it moves along the tracks. Remember to be wary of the weight of the door, making sure that you always maintain full control of it as it is being lowered.

When the door is near to the ground, you need to carefully guide it into a fully stopped and closed position. Double check that the bottom lip of the door sits flush against the ground, making sure not to leave any gaps that might compromise the security of your garage when you have left the space.

If the door in question happens to have a manual locking mechanism, then you should engage it to secure the door after you have closed it. This might be sliding a bolt into place or the turning of a handle. If you are finding that the lock isn’t engaging as easily as you anticipated, then make some checks on the overall alignment of the tracks and door.

How to manually open or close a garage door can be crucial if you happen to be inside your garage when the automatic opener malfunctions. In this situation, you will need to follow a slightly different set of procedures to manually open or close it. Here is how to perform interior garage door manual operation and close a garage door from the inside.

Before you start to manually operate the garage door, make sure that you have turned off the automatic opener. Doing this will prevent the motor from suddenly re-engaging while you are working on components.

Inside your garage, you will find a red emergency release cord that hangs from the trolley connecting the garage door to the opener. It is most commonly located near to the center of the track of the garage door.

You need to pull firmly on this emergency release cord in a downward motion. Completing this action will disconnect the door from the opener, thus allowing you to manually lower or lift it as you wish.

Whilst the door is disengaged, you are able to manually lift it open or lower it closed depending on what you need to do. Stand in the center of the door and again, use both hands to guide the door along its tracks. If you encounter unexpected resistance that has nothing to do with the weight of the door, then check for any issues or obstructions related to the springs.

Once you have manually operated the door, you can go about re-engaging the automatic opener by pulling the release cord for a second time, or by activating the garage door opener via the provided remote control. If successful, the trolley will automatically reconnect to the door once the opener has been used.

Once you have been able to manually open your garage door, it is equally important that you are able to close and lock it. This leads to the question of how to lock garage doors after manual use. This is particularly the case if your automatic locking mechanism is not working. Here are some steps to follow to achieve successful manual garage door lock.

Lots of garage doors will have small holes on the tracks that can allow for a padlock to be inserted. If you insert a padlock through any of these holes, you will be able to prevent the door from being lifted any further.

Alternatively, some garage doors are designed with built-in manual locks, and these are usually located on the inside of the door. These kinds of locks will usually be made up of a sliding bolt or a bar that fits into a slot somewhere on the track. Engaging and setting this lock will also do the job of securing the door and preventing it from being opened.

After you have locked your door, it is always good practice to double check it by trying to lift it gently. If it moves in a way that you were not expecting, then you might need to adjust the lock or re-check the alignment of the door and tracks.

The issue of how to lock a garage door after manual use is something that can present an array of challenges, and some that you might not always have an instinctive answer to. If you are working to fix a manual garage, read through these common troubleshooting queries to get a step ahead.

If the garage door feels overly heavy or too difficult to lift, then it may be down to a broken spring or a damaged cable. These are the components that are supposed to bear the weight of the door, so you can imagine that if they are broken, the door might be too heavy to operate. In this case, you should avoid trying to force the door open yourself and instead contact a professional.

If you pull the emergency release cord and it does not disengage the door from the opener as it should, then check to see if the cord is tangled in any way or disconnected from the trolley. If the cord looks intact and is still not working, then you will need to manually release the trolley with the help of pliers or a wrench.

If the garage door does not stay in place after you have manually opened or closed it, then it is an indicator of a problem with the cables or springs. To keep the door in place temporarily, you can use locking pliers to clamp directly onto the track. Please note that this is only a temporary solution and that professional repair will probably be needed.

If you cannot seem to close the door properly, or it feels misaligned, then you need to check the tracks for any damage or debris. Some of these issues can be solved by lubricating the rollers and track to improve their glide. If the door still isn’t locking properly, then the next step is to inspect the locking mechanism for any signs of damage or wear.

Ultimately, knowing how to manually open or close a garage door is a valuable skill for any homeowner to have, particularly in the event of emergency situations. Take care to follow the steps listed above and you will have a firm grasp of how to approach the problem should it ever arise on your own property. Professional repair experts are always on hand to help, but if you can fix the issue by yourself, even temporarily, then it can be of huge benefit.